Affordable 1:12 racing with equal material.
Mini Masters is the accessible entry class around the BattCave JOK3R-R Bleiswijk Edition. The class is deliberately tightly regulated, so differences mainly come from driving, setup and preparation.
How does this class work?
The class is about equal material and affordable racing. That creates close racing and keeps preparation clear.
- Fixed choices for chassis, motor, ESC, servo, battery, body and tyres.
- Parts and consumables through the on-site shop and RC Speedhouse.
- Suitable as an entry into 1:12 racing.
JOK3R setup and tips
The old JOK3R setup page belongs with this class, because a lot of speed comes from careful building, setup and preparation.
Basic setup
- Use the RCIB setup sheet as a starting point.
- Check at least 3 mm ride height before entering the track.
- Start with about 0.8 to 1.0 mm rear droop.
- After every run, check that no screws, body parts or body posts scrape the carpet.
Body mounting
- Use the Phat Bodies M.A.D. Mini body.
- Cut the body only along the manufacturer’s intended lines.
- Place body holes accurately so the body can move freely and does not drag.
- Do not make extra holes or cut away parts for extra performance.
- Use only the included spoiler; the BattCave bumper and diffuser fit the RCIB setup well.
ESC and electronics
- Surpass Rocket 100A remains allowed.
- The Hobbywing 10BL60 G2 is allowed; choose the G2 because it is sensored.
- Use the correct program card to set up the ESC.
- Make sure there is enough room for the sensor cable and keep wiring clear of moving parts.
- The front servo mount creates more room for electronics in the car.
Tyres and preparation
- Contact 50Sh front tyres and Contact 35Sh rear tyres are the base.
- The original tips mention truing tyres towards 45 mm as a practical starting point.
- Spider Blue is used as the tyre additive in the old JOK3R setup notes.
- Let tyres go onto the track dry and follow the approved additive list.
Help at the track
- If in doubt, bring your car to the crew before driving.
- The Mini Masters WhatsApp group is useful for setup questions and parts advice.
- The BattCave Mini support group contains additional build and setup information.
Materials and shopping list
De originele Mini Masters informatie noemt de klasse als betaalbare route naar 1:12 racen, met onderdelen die bewust strak gekozen zijn.
- BattCave JOK3R-R kit as the fixed base.
- Surpass Rocket 25.5T, BattCave IMPOST3R 25.5T or BattCave IMPOST3R 30.5T motor.
- Surpass 100A or Hobbywing 10BL60 G2 ESC.
- Phat Bodies M.A.D. Mini body with included spoiler.
- Surpass SJ0015M or Savox SH-0257MG servo.
- Cayote 2S shorty LiPo as the mentioned battery option.
- The original indication is about EUR 425 for a complete base, or around EUR 450 with three sets of tyres.